PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ANSI A156.2 TY F82 GR2 SER 4000
ANSI A156.2 TY F82 GR2 SER 4000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANSI A156.2 TY F82 GR2 SER 4000 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-963-8310, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ANSI A156.2 TY F82 GR2 SER 4000
NSN: 5340-00-963-8310
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
Part NumberANSI A156.2 TY F82 GR2 SER 4000
NSN5340-00-963-8310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ANSI A156.2 TY F82 GR2 SER 4000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FACE SHAPE: FLAT
•
OPERATION METHOD: KNOB ON INSIDE AND KNOB ON OUTSIDE LATCH BOLT
•
FEATURES PROVIDED: ROSE AND STRIKE AND SCREW
•
LOCKING MECHANISM TYPE: PIN TUMBLER
•
MATERIAL: COPPER ALLOY OR STEEL OR STEEL CORROSION RESISTING OR ALUMINUM CASE
•
THICKNESS: 1.375 INCHES NOMINAL OVERALL IN
•
KNOB QUANTITY: 2
•
BOLT TYPE: REVERSIBLE BEVEL
TECHNICAL CHARACTERISTICS (FLIS)
FACE SHAPEFLAT
OPERATION METHODKNOB ON INSIDE AND KNOB ON OUTSIDE LATCH BOLT
FEATURES PROVIDEDROSE AND STRIKE AND SCREW
LOCKING MECHANISM TYPEPIN TUMBLER
MATERIALCOPPER ALLOY OR STEEL OR STEEL CORROSION RESISTING OR ALUMINUM CASE
THICKNESS1.375 INCHES NOMINAL OVERALL IN
KNOB QUANTITY2
BOLT TYPEREVERSIBLE BEVEL
SHAPEROUND CASE
KNOB SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
ANSI A156.2 FUNCTION F88 GRADE 1Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2 F88 GRADE 1Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2 F76A GRADE 2Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.2 FUNCTION F76 GRADE 2Interchangeable
interchangeable cross-reference
interchangeable
ANSI/BHMA A156.2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ANSI A156.2 TY F82 GR2 SER 4000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANSI A156.2 TY F82 GR2 SER 4000?
ANSI A156.2 TY F82 GR2 SER 4000 is a ANSI A156.2 TY F82 GR2 SER 4000.
What parts can replace ANSI A156.2 TY F82 GR2 SER 4000?
There are 22 known substitutes for ANSI A156.2 TY F82 GR2 SER 4000: ANSI A156.2 FUNCTION F88 GRADE 1, BHMA-A156.2, BHMA-A156.2 F88 GRADE 1 and 19 more. Substitute compatibility should be verified for your specific system.
Is ANSI A156.2 TY F82 GR2 SER 4000 still available?
ANSI A156.2 TY F82 GR2 SER 4000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ANSI A156.2 TY F82 GR2 SER 4000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026