PartsTable / COMPONENT / ANSI A156.2 FUNCTION F80 GRADE 1
ANSI A156.2 FUNCTION F80 GRADE 1 — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The LOCK SET,MORTISE is a the manufacturer industrial component. Key specifications include shape: ROUND CASE, width: 1.125 INCHES NOMINAL IN, length: 2.250 INCHES NOMINAL IN, material: ALUMINUM OR COPPER ALLOY KNOB, thickness: 2.750 INCHES NOMINAL BACKSET IN, knob_shape: ROUND. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5340-01-019-2978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ANSI A156.2 FUNCTION F80 GRADE 1
NSN:5340-01-019-2978 FSC:5340 CAGE:80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
shape
ROUND CASE
width
1.125 INCHES NOMINAL IN
length
2.250 INCHES NOMINAL IN
material
ALUMINUM OR COPPER ALLOY KNOB
thickness
2.750 INCHES NOMINAL BACKSET IN
knob_shape
ROUND
design_type
DEAD BOLT AND LATCH BOLT
operation_method
KNOB ON INSIDE AND KNOB ON OUTSIDE LATCH BOLT
features_provided
ROSE
locking_mechanism_type
PIN TUMBLER
specification/standard_data
80205-80204-ANSI A156.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
5340-01-019-2978
COMPONENT DIAGRAM
KEY FEATURES
•
WIDTH: 1.125 INCHES NOMINAL IN
•
LOCKING MECHANISM TYPE: PIN TUMBLER
•
DESIGN TYPE: DEAD BOLT AND LATCH BOLT
•
SHAPE: ROUND CASE
•
THICKNESS: 2.750 INCHES NOMINAL BACKSET IN
•
KNOB SHAPE: ROUND
•
SPECIFICATION/STANDARD DATA: 80205-80204-ANSI A156.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
WIDTH
1.125 INCHES NOMINAL IN
LOCKING MECHANISM TYPE
PIN TUMBLER
DESIGN TYPE
DEAD BOLT AND LATCH BOLT
SHAPE
ROUND CASE
THICKNESS
2.750 INCHES NOMINAL BACKSET IN
KNOB SHAPE
ROUND
THICKNESS
1.375 INCHES NOMINAL OVERALL IN
SPECIFICATION/STANDARD DATA
80205-80204-ANSI A156.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANSI A156.2 FUNCTION F80 GRADE 1?
ANSI A156.2 FUNCTION F80 GRADE 1 is a LOCK SET,MORTISE.
What parts can replace ANSI A156.2 FUNCTION F80 GRADE 1?
There are 23 known substitutes for ANSI A156.2 FUNCTION F80 GRADE 1: ANSI A156.2 FUNCTION F88 GRADE 1, BHMA-A156.2, BHMA-A156.2 F88 GRADE 1 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ANSI A156.2 FUNCTION F80 GRADE 1?
ANSI A156.2 FUNCTION F80 GRADE 1 is cataloged in the Federal Logistics Information System under NSN 5340-01-019-2978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.
Request a Quote — ANSI A156.2 FUNCTION F80 GRADE 1