PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ANSI A156.2 F82 GRD 1
ANSI A156.2 F82 GRD 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANSI A156.2 F82 GRD 1 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-110-2043, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ANSI A156.2 F82 GRD 1
NSN: 5340-01-110-2043
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
Part NumberANSI A156.2 F82 GRD 1
NSN5340-01-110-2043
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ANSI A156.2 F82 GRD 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNOB SHAPE: ROUND
•
FEATURES PROVIDED: ROSE AND SPINDLE AND STRIKE AND SCREW
•
MATERIAL: COPPER ALLOY OR ALUMINUM KNOB
•
DESIGN TYPE: LATCH
•
OPERATION METHOD: INSIDE TURN KNOB AND OUTSIDE KEY AND OUTSIDE TURN KNOB LATCH BOLT
•
FACE SHAPE: FLAT
•
NONDEFINITIVE SPEC/STD DATA: 161B TYPE
•
BOLT TYPE: REGULAR BEVEL
TECHNICAL CHARACTERISTICS (FLIS)
KNOB SHAPEROUND
FEATURES PROVIDEDROSE AND SPINDLE AND STRIKE AND SCREW
MATERIALCOPPER ALLOY OR ALUMINUM KNOB
DESIGN TYPELATCH
OPERATION METHODINSIDE TURN KNOB AND OUTSIDE KEY AND OUTSIDE TURN KNOB LATCH BOLT
FACE SHAPEFLAT
NONDEFINITIVE SPEC/STD DATA161B TYPE
BOLT TYPEREGULAR BEVEL
KNOB QUANTITY2
THICKNESS1.375 INCHES NOMINAL OVERALL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
ANSI A156.2 FUNCTION F88 GRADE 1Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2 F88 GRADE 1Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.2 F76A GRADE 2Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.2 FUNCTION F76 GRADE 2Interchangeable
interchangeable cross-reference
interchangeable
ANSI/BHMA A156.2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ANSI A156.2 F82 GRD 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANSI A156.2 F82 GRD 1?
ANSI A156.2 F82 GRD 1 is a ANSI A156.2 F82 GRD 1.
What parts can replace ANSI A156.2 F82 GRD 1?
There are 21 known substitutes for ANSI A156.2 F82 GRD 1: ANSI A156.2 FUNCTION F88 GRADE 1, BHMA-A156.2, BHMA-A156.2 F88 GRADE 1 and 18 more. Substitute compatibility should be verified for your specific system.
Is ANSI A156.2 F82 GRD 1 still available?
ANSI A156.2 F82 GRD 1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ANSI A156.2 F82 GRD 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026