PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ANSI A156-4 TYP E C02012 SIZE3
ANSI A156-4 TYP E C02012 SIZE3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLOSER,DOOR is a the manufacturer industrial component. Key specifications include unit_type: SINGLE ACTION, control_type: LIQUID, special_features: NONGOVERNMENT DOCUMENT DATA:80204-A156.4, operational_direction: LEFT-HAND OR RIGHT-HAND, mounting_type_for_which_designed: SURFACE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-000-0058, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ANSI A156-4 TYP E C02012 SIZE3
NSN: 5340-00-000-0058
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
unit_typeSINGLE ACTION
control_typeLIQUID
special_featuresNONGOVERNMENT DOCUMENT DATA:80204-A156.4
operational_directionLEFT-HAND OR RIGHT-HAND
mounting_type_for_which_designedSURFACE
NSN5340-00-000-0058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ANSI A156-4 TYP E C02012 SIZE3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING TYPE FOR WHICH DESIGNED: SURFACE
•
OPERATIONAL DIRECTION: LEFT-HAND OR RIGHT-HAND
•
CONTROL TYPE: LIQUID
•
UNIT TYPE: SINGLE ACTION
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING TYPE FOR WHICH DESIGNEDSURFACE
OPERATIONAL DIRECTIONLEFT-HAND OR RIGHT-HAND
CONTROL TYPELIQUID
SPECIAL FEATURESNONGOVERNMENT DOCUMENT DATA:80204-A156.4
UNIT TYPESINGLE ACTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
FF-H-121Upgraded Successor
successor cross-reference
successor
BHMA-A156.4 C02012 SIZE 5Upgraded Successor
successor cross-reference
successor
BHMA-A156.4Upgraded Successor
successor cross-reference
successor
A156.4 TYPE C02012 SIZE 4Upgraded Successor
successor cross-reference
successor
A-A-1926Upgraded Successor
successor cross-reference
successor
K740/ALUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy ANSI A156-4 TYP E C02012 SIZE3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANSI A156-4 TYP E C02012 SIZE3?
ANSI A156-4 TYP E C02012 SIZE3 is a CLOSER,DOOR.
What parts can replace ANSI A156-4 TYP E C02012 SIZE3?
There are 13 known substitutes for ANSI A156-4 TYP E C02012 SIZE3: FF-H-121, BHMA-A156.4 C02012 SIZE 5, BHMA-A156.4 and 10 more. Substitute compatibility should be verified for your specific system.
Is ANSI A156-4 TYP E C02012 SIZE3 still available?
ANSI A156-4 TYP E C02012 SIZE3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ANSI A156-4 TYP E C02012 SIZE3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026