PartsTable
Technical Data Sheet
Download PDF

ANM7(L1) — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

ANM7(L1): BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.4370 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN, overall_length: 2.7000 INCHES NOMINAL IN, hardness_rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-347-7303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ANM7(L1)
NSN: 3120-01-347-7303
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 ROD END BODY
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.4370 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
overall_length2.7000 INCHES NOMINAL IN
hardness_rating55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
thread_diameter0.4370 INCHES NOMINAL IN
style_designatorBALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
outer_member_width0.4470 INCHES MINIMUM AND 0.4570 INCHES MAXIMUM IN
shank_thread_length1.2500 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN
NSN3120-01-347-7303
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ANM7(L1) · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.2500 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 2.1150 INCHES MINIMUM AND 2.1350 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
•
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
•
OUTER MEMBER WIDTH: 0.4470 INCHES MINIMUM AND 0.4570 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.2500 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE2.1150 INCHES MINIMUM AND 2.1350 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH0.4470 INCHES MINIMUM AND 0.4570 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.4370 INCHES NOMINAL IN
OVERALL LENGTH2.7000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 4
ANM7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
04A077-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SWKRM-7-500Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
01-824-07Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ANM7(L1)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ANM7(L1)?
ANM7(L1) is a BEARING,PLAIN,ROD END.
What parts can replace ANM7(L1)?
There are 4 known substitutes for ANM7(L1): ANM7, 04A077-7, SWKRM-7-500 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ANM7(L1)?
ANM7(L1) is cataloged in the U.S. Government catalog under NSN 3120-01-347-7303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ANM7(L1)