PartsTable
Technical Data Sheet
Download PDF

AN960XC10LL — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN960XC10LL: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46A TANKER A, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-200-6280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960XC10LL
NSN: 5310-01-200-6280
NIINs: 012006280, 017007452
FSC: 5310 — Nuts and Washers
CAGE: 5M696 — UFC AEROSPACE CORP. (USA)
SPECIFICATIONS
end_item_identificationKC-46A TANKER A
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5310-01-200-6280
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960XC10LL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND B CLASS
•
SURFACE TREATMENT: OXIDE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
SURFACE TREATMENTOXIDE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
THICKNESS0.016 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
NAS1149C0316BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy AN960XC10LL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960XC10LL?
AN960XC10LL is a WASHER,FLAT.
What parts can replace AN960XC10LL?
There are 2 known substitutes for AN960XC10LL: FF-W-92, NAS1149C0316B. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960XC10LL?
AN960XC10LL is cataloged in the U.S. Government catalog under NSN 5310-01-200-6280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960XC10LL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.