PartsTable
Technical Data Sheet
Download PDF

AN960PD816L — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN960PD816L: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 1230 OVERALL, thickness: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN, hole_diameter: 0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN, overall_diameter: 0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-184-8976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960PD816L
NSN: 5310-00-184-8976
NIINs: 001848976, 014110978
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 1230 OVERALL
thickness0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
hole_diameter0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
overall_diameter0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
specification/standard_data80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationQQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-184-8976
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960PD816L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
807988Reference document
Same NSN cross-reference
Reference document — Secondary reference
10088000Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN960PD816L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960PD816L?
AN960PD816L is a WASHER,FLAT.
What parts can replace AN960PD816L?
There are 3 known substitutes for AN960PD816L: 807988, 10088000, FF-W-92. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960PD816L?
AN960PD816L is cataloged in the U.S. Government catalog under NSN 5310-00-184-8976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960PD816L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.