PartsTable
Technical Data Sheet
Download PDF

AN960KD816 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN960KD816: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.063 INCHES NOMINAL IN, hole_diameter: 0.515 INCHES NOMINAL IN, overall_diameter: 0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-134-3288, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960KD816
NSN: 5310-01-134-3288
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.063 INCHES NOMINAL IN
hole_diameter0.515 INCHES NOMINAL IN
overall_diameter0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND D CLASS
material_document_and_classificationQQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-134-3288
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960KD816 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 1 GRADE AND D CLASS
•
SURFACE TREATMENT: ANODIZE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.870 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND D CLASS
SURFACE TREATMENTANODIZE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.515 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
NAS1149D0863KReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
ASNA2397KD816Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL0553969Reference document
Same NSN cross-reference
Reference document — Informative reference only
907905Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN960KD816?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960KD816?
AN960KD816 is a WASHER,FLAT.
What parts can replace AN960KD816?
There are 5 known substitutes for AN960KD816: NAS1149D0863K, FF-W-92, ASNA2397KD816 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960KD816?
AN960KD816 is cataloged in the U.S. Government catalog under NSN 5310-01-134-3288. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960KD816

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.