PartsTable
Technical Data Sheet
Download PDF

AN960KD10 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN960KD10: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL, thickness: 0.063 INCHES NOMINAL IN, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, overall_diameter: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-134-5794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960KD10
NSN: 5310-01-134-5794
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL
thickness0.063 INCHES NOMINAL IN
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_diameter0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataPE A TYPE AND ADE 2 GRADE
material_document_and_classificationQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-134-5794
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960KD10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
NONDEFINITIVE SPEC/STD DATA: PE A TYPE AND ADE 2 GRADE
•
SURFACE TREATMENT: ANODIZE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
NONDEFINITIVE SPEC/STD DATAPE A TYPE AND ADE 2 GRADE
SURFACE TREATMENTANODIZE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 5
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
938.77.81.013Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0652436Reference document
Same NSN cross-reference
Reference document — Informative reference only
907889Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
KD10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AN960KD10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960KD10?
AN960KD10 is a WASHER,FLAT.
What parts can replace AN960KD10?
There are 5 known substitutes for AN960KD10: FF-W-92, 938.77.81.013, 5310PL0652436 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960KD10?
AN960KD10 is cataloged in the U.S. Government catalog under NSN 5310-01-134-5794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960KD10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.