PartsTable
Technical Data Sheet
Download PDF

AN960D10 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN960D10: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, overall_diameter: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN, special_features: W/S CRITICALITEM, special_test_features: FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO 910894.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-167-1723, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960D10
NSN: 5310-00-167-1723
NIINs: 001671723, 008510913
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_diameter0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
special_featuresW/S CRITICALITEM
special_test_featuresFLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO 910894
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
criticality_code_justificationFEAT
departure_from_cited_designatorAS MODIFIED BY SPECIAL TEST FEATURES
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-167-1723
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960D10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.443 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
HEAT TREATMENT: T-36 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.443 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
HEAT TREATMENTT-36 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.203 INCHES NOMINAL IN
THICKNESS0.070 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
10087998Reference document
Same NSN cross-reference
Reference document — Informative reference only
2411407Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ASNA2397D10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8805142Reference document
Same NSN cross-reference
Reference document — Secondary reference
809864Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy AN960D10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960D10?
AN960D10 is a WASHER,FLAT.
What parts can replace AN960D10?
There are 5 known substitutes for AN960D10: 10087998, 2411407, ASNA2397D10 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960D10?
AN960D10 is cataloged in the U.S. Government catalog under NSN 5310-00-167-1723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960D10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.