PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN960-4
AN960-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.025 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN, hole_diameter: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, overall_diameter: 0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-021-8322, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960-4
NSN: 5310-00-021-8322
FSC: 5310
CAGE: 95764 — AIR ASSOCIATES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.025 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
hole_diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
overall_diameter0.307 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-021-8322
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE FINISH AND HOLE DIA
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
THICKNESS: 0.032 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,COMP FS1010-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.125 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE FINISH AND HOLE DIA
NONDEFINITIVE SPEC/STD DATAA TYPE
THICKNESS0.032 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,COMP FS1010-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL DIAMETER0.312 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
21168NPC20Interchangeable
interchangeable cross-reference
interchangeable
46833Interchangeable
interchangeable cross-reference
interchangeable
MS9321-05Interchangeable
interchangeable cross-reference
interchangeable
218322Interchangeable
interchangeable cross-reference
interchangeable
5310PL0852916Interchangeable
interchangeable cross-reference
interchangeable
AN960-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN960-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960-4?
AN960-4 is a WASHER,FLAT.
What parts can replace AN960-4?
There are 13 known substitutes for AN960-4: 21168NPC20, 46833, MS9321-05 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960-4?
AN960-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-021-8322. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026