PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN960-1416L
AN960-1416L ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, thickness: 0.032 INCHES NOMINAL IN, hole_diameter: 0.890 INCHES NOMINAL IN, heat_treatment: AS FABRICATED, overall_diameter: 1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960-1416L
NSN: 5310-00-167-0843
FSC: 5310
CAGE: AC910 — AERTEKNO S.R.L. (ITA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
thickness0.032 INCHES NOMINAL IN
hole_diameter0.890 INCHES NOMINAL IN
heat_treatmentAS FABRICATED
overall_diameter1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0843
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960-1416L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
•
THICKNESS: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
OVERALL DIAMETER1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
1340Interchangeable
interchangeable cross-reference
interchangeable
2012-T 13Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCInterchangeable
interchangeable cross-reference
interchangeable
29947Interchangeable
interchangeable cross-reference
interchangeable
157496R91Interchangeable
interchangeable cross-reference
interchangeable
L1096-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN960-1416L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960-1416L?
AN960-1416L is a WASHER,FLAT.
What parts can replace AN960-1416L?
There are 18 known substitutes for AN960-1416L: 1340, 2012-T 13, GGG-D-751 TYC and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN960-1416L?
AN960-1416L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960-1416L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026