PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN960-1416
AN960-1416 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, hole_diameter: 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN, overall_diameter: 1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0827, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN960-1416
NSN: 5310-00-167-0827
FSC: 5310
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
hole_diameter0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
overall_diameter1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0827
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN960-1416 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OVERALL DIAMETER: 1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
THICKNESS: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
END ITEM IDENTIFICATIONW/S:DEEP SUBMERGENCE SYSTEMS PROGRAMS (DSSP); AVIATION ENGINE TEST SYSTEMS (AETS); HELICOPTER, MH-53E; ENGINE, AIRCRAFT, TF39-GE-1 (C-5A); AIRCRAFT, T-39; AIRCRAFT, C-2A (REPROCURED); SUPPORT EQUIPMENT, B-1 AIRCRAFT; ENGINE, AIRCRAFT, T56-A-7/15 (C-130B/E/H/N/P); AIRCRAFT, C-18A, EC-18B; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130) A
OVERALL DIAMETER1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
THICKNESS0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
HOLE DIAMETER0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
911261Interchangeable
interchangeable cross-reference
interchangeable
SSC5712Interchangeable
interchangeable cross-reference
interchangeable
C9909Interchangeable
interchangeable cross-reference
interchangeable
552821Interchangeable
interchangeable cross-reference
interchangeable
10087994Interchangeable
Same NIIN cross-reference
interchangeable
407 575Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN960-1416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN960-1416?
AN960-1416 is a WASHER,FLAT.
What parts can replace AN960-1416?
There are 10 known substitutes for AN960-1416: 911261, SSC5712, C9909 and 7 more. Substitute compatibility should be verified for your specific system.
Is AN960-1416 still available?
AN960-1416 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN960-1416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026