PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN936C416
AN936C416 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.454 INCHES NOMINAL IN, style_designator: COUNTERSINK EXTERNAL TEETH, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0862, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN936C416
NSN: 5310-00-167-0862
FSC: 5310
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1055 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
hole_diameter0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.454 INCHES NOMINAL IN
style_designatorCOUNTERSINK EXTERNAL TEETH
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OVERALL
material_thickness0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
nondefinitive_spec/std_data4 TYPE AND 1 STYLE AND A GRADE AND 1 COMPOSITION
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0862
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN936C416 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
STYLE DESIGNATOR: COUNTERSINK EXTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
STYLE DESIGNATORCOUNTERSINK EXTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
Q0008351Interchangeable
interchangeable cross-reference
interchangeable
306471Interchangeable
interchangeable cross-reference
interchangeable
138606Interchangeable
interchangeable cross-reference
interchangeable
1056H133Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN936C416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN936C416?
AN936C416 is a WASHER,LOCK.
What parts can replace AN936C416?
There are 4 known substitutes for AN936C416: Q0008351, 306471, 138606 and 1 more. Substitute compatibility should be verified for your specific system.
Is AN936C416 still available?
AN936C416 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN936C416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026