PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN935B10
AN935B10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, hardness_rating: 90.0 ROCKWELL B MINIMUM, outside_diameter: 0.334 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN935B10
NSN: 5310-00-167-0663
FSC: 5310
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
hardness_rating90.0 ROCKWELL B MINIMUM
outside_diameter0.334 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0663
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN935B10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-746 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 510 OVERALL
•
OUTSIDE DIAMETER: 0.337 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESDYED LIGHT YELLOW
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-746 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 510 OVERALL
OUTSIDE DIAMETER0.337 INCHES MAXIMUM IN
HOLE DIAMETER0.194 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
93496A415Interchangeable
interchangeable cross-reference
interchangeable
310-0080-000Interchangeable
interchangeable cross-reference
interchangeable
FF-W-84AInterchangeable
interchangeable cross-reference
interchangeable
205-0020Interchangeable
interchangeable cross-reference
interchangeable
N407P39C11Interchangeable
Same NIIN cross-reference
interchangeable
N407G39C11Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN935B10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN935B10?
AN935B10 is a WASHER,LOCK.
What parts can replace AN935B10?
There are 7 known substitutes for AN935B10: 93496A415, 310-0080-000, FF-W-84A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN935B10?
AN935B10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN935B10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026