PartsTable
Technical Data Sheet
Download PDF

AN924-100 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN924-100: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OVERALL, nut_style: HEXAGON, nut_height: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-282-7834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN924-100
NSN: 5310-00-282-7834
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OVERALL
nut_styleHEXAGON
nut_height0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
surface_treatmentANODIZE OVERALL
width_across_flats1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
nominal_thread_size0.875 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch14
NSN5310-00-282-7834
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN924-100 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-266 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-266 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
COUNTERSINK ANGLE89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 8
156/8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS24400D10Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0717673Reference document
Same NSN cross-reference
Reference document — Informative reference only
477 704Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
946.29.94.024Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3110331Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy AN924-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN924-100?
AN924-100 is a NUT,PLAIN,HEXAGON.
What parts can replace AN924-100?
There are 8 known substitutes for AN924-100: 156/8, MS24400D10, 5310PL0717673 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN924-100?
AN924-100 is cataloged in the U.S. Government catalog under NSN 5310-00-282-7834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN924-100