PartsTable
Technical Data Sheet
Download PDF

AN901-12C — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN901-12C: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 1.360 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN, aperture_diameter: 1.068 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN, cross-sectional_thickness: 0.0478 INCHES MINIMUM AND 0.0538 INCHES MAXIMUM IN, cross-sectional_shape_style: RECTANGULAR METAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-196-6711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN901-12C
NSN: 5330-00-196-6711
FSC: 5330 — Packing and Gasket Materials
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
outside_diameter1.360 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
aperture_diameter1.068 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
cross-sectional_thickness0.0478 INCHES MINIMUM AND 0.0538 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR METAL
NSN5330-00-196-6711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN901-12C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.0478 INCHES MINIMUM AND 0.0538 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 1.360 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.068 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.0478 INCHES MINIMUM AND 0.0538 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER1.360 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
APERTURE DIAMETER1.068 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
8666543Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN901Reference document
Same NSN cross-reference
Reference document — Identification reference
S16648Reference document
Same NSN cross-reference
Reference document — Secondary reference
A68-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN901-12C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN901-12C?
AN901-12C is a GASKET.
What parts can replace AN901-12C?
There are 4 known substitutes for AN901-12C: 8666543, AN901, S16648 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN901-12C?
AN901-12C is cataloged in the U.S. Government catalog under NSN 5330-00-196-6711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN901-12C