PartsTable
Technical Data Sheet
Download PDF

AN894-4-2 — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AN894-4-2: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, seat_angle: 37.0 DEGREES FIRST END, thread_class: 3A FIRST END A, connection_type: THREADED EXTERNAL TUBE FIRST END, connection_style: FLARED (TUBE) FIRST END, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-804-1900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN894-4-2
NSN: 4730-00-804-1900
NIINs: 008041900, 012573701
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
seat_angle37.0 DEGREES FIRST END
thread_class3A FIRST END A
connection_typeTHREADED EXTERNAL TUBE FIRST END
connection_styleFLARED (TUBE) FIRST END
surface_treatmentCADMIUM OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.312 INCHES FIRST END IN
nominal_overall_length1.297 INCHES IN
media_for_which_designedFLUID SINGLE RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) SECOND END
specification/standard_data88044-AN894 GOVERNMENT STANDARD AND 81343-AS4875/1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN4730-00-804-1900
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AN894-4-2 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: FLARED (TUBE) FIRST END
•
NOMINAL OVERALL LENGTH: 1.297 INCHES IN
•
CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.125 INCHES FIRST END IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NOMINAL THREAD SIZE: 0.438 INCHES SECOND END IN
TECHNICAL CHARACTERISTICS
CONNECTION STYLEFLARED (TUBE) FIRST END
CONNECTION STYLEGASKET SEAL (BOSS) SECOND END
NOMINAL OVERALL LENGTH1.297 INCHES IN
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END
CONNECTION TYPETHREADED INTERNAL BOSS SECOND END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.125 INCHES FIRST END IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL THREAD SIZE0.438 INCHES SECOND END IN
NOMINAL THREAD SIZE0.312 INCHES FIRST END IN
SEAT ANGLE37.0 DEGREES FIRST END
SUBSTITUTES & CROSS-REFERENCES 7
AS5173-0402Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS4875Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24398-4-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILF5509AReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-F-5509Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS4875/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN894-4-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN894-4-2?
AN894-4-2 is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace AN894-4-2?
There are 7 known substitutes for AN894-4-2: AS5173-0402, AS4875, MS24398-4-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN894-4-2?
AN894-4-2 is cataloged in the U.S. Government catalog under NSN 4730-00-804-1900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN894-4-2