PartsTable
Technical Data Sheet
Download PDF

AN892 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN892: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, aperture_width: 4.500 INCHES NOMINAL IN, bearing_surface_width: 0.545 INCHES NOMINAL IN, cross-sectional_thickness: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-498-0031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN892
NSN: 5330-00-498-0031
FSC: 5330 — Packing and Gasket Materials
CAGE: 05264 — D V DIE CUTTING, INC. DBA DV DIE CUTTING INC (USA)
SPECIFICATIONS
hole_diameter0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
aperture_width4.500 INCHES NOMINAL IN
bearing_surface_width0.545 INCHES NOMINAL IN
cross-sectional_thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-498-0031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN892 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
BEARING SURFACE WIDTH: 0.545 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 4.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
BEARING SURFACE WIDTH0.545 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE WIDTH4.500 INCHES NOMINAL IN
HOLE DIAMETER0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
2844129Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy AN892?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN892?
AN892 is a GASKET.
What parts can replace AN892?
There is 1 known substitute for AN892: 2844129. Substitute compatibility should be verified for your specific system.
What is the NSN for AN892?
AN892 is cataloged in the U.S. Government catalog under NSN 5330-00-498-0031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN892