PartsTable
Technical Data Sheet
Download PDF

AN834-8 — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AN834-8: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, leg_length: 1.172 INCHES NOMINAL FIRST END IN, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 3A THIRD END BULKHEAD A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-277-5020, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN834-8
NSN: 4730-00-277-5020
NIINs: 002775020, 008054518
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
leg_length1.172 INCHES NOMINAL FIRST END IN
seat_angle37.0 DEGREES ALL ENDS
thread_class3A THIRD END BULKHEAD A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.750 INCHES ALL ENDS IN
end_item_identificationSIKORSKY CARGO TRANSPORT HELICOPTER AVENGER CLASS MCM
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) THIRD END BULKHEAD
specification/standard_data96906-MS24395 GOVERNMENT STANDARD
nominal_outside_diameter_tube_accommodated0.500 INCHES ALL ENDS IN
NSN4730-00-277-5020
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AN834-8 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: FLARED (TUBE) ALL ENDS
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES ALL ENDS IN
•
LEG LENGTH: 1.344 INCHES NOMINAL SECOND END IN
•
NOMINAL THREAD SIZE: 0.750 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
CONNECTION STYLEFLARED (TUBE) ALL ENDS
CRITICALITY CODE JUSTIFICATIONFEAT
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES ALL ENDS IN
LEG LENGTH1.344 INCHES NOMINAL SECOND END IN
LEG LENGTH1.344 INCHES NOMINAL FIRST END IN
LEG LENGTH2.094 INCHES NOMINAL THIRD END IN
NOMINAL THREAD SIZE0.750 INCHES ALL ENDS IN
NOMINAL THREAD SIZE0.750 INCHES THIRD END BULKHEAD IN
SEAT ANGLE37.0 DEGREES ALL ENDS
SUBSTITUTES & CROSS-REFERENCES 7
AS1039DReference document
Same NSN cross-reference
Reference document — Secondary reference
AS1039Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AN830-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
8169349Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS1039-080808Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS4841Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN834-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN834-8?
AN834-8 is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace AN834-8?
There are 7 known substitutes for AN834-8: AS1039D, AS1039, AN830-8 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN834-8?
AN834-8 is cataloged in the U.S. Government catalog under NSN 4730-00-277-5020. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN834-8