PartsTable
Technical Data Sheet
Download PDF

AN819-2D — SLEEVE,FLARED,TUBE FITTING

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AN819-2D: SLEEVE,FLARED,TUBE FITTING.

The SLEEVE,FLARED,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024, flange_width: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, overall_length: 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, style_designator: SLEEVE, seat_angle_in_deg: 33.0, surface_treatment: ANODIZE. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-070-6528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN819-2D
NSN: 4730-01-070-6528
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024
flange_width0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
overall_length0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
style_designatorSLEEVE
seat_angle_in_deg33.0
surface_treatmentANODIZE
casehardening_indicatorNOT CASEHARDENED
flange_outside_diameter0.264 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
sleeve_outside_diameter0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
hose/tube_outside_diameter_for_which_designed0.125 INCHES NOMINAL IN
NSN4730-01-070-6528
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AN819-2D · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAT ANGLE IN DEG: 33.0
•
STYLE DESIGNATOR: SLEEVE
•
SLEEVE OUTSIDE DIAMETER: 0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: ANODIZE
•
FLANGE WIDTH: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS
SEAT ANGLE IN DEG33.0
STYLE DESIGNATORSLEEVE
OVERALL LENGTH0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SLEEVE OUTSIDE DIAMETER0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTANODIZE
FLANGE WIDTH0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024
FLANGE OUTSIDE DIAMETER0.264 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 3
AS3220-02Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS20819-2DReference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS4841Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN819-2D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN819-2D?
AN819-2D is a SLEEVE,FLARED,TUBE FITTING.
What parts can replace AN819-2D?
There are 3 known substitutes for AN819-2D: AS3220-02, MS20819-2D, SAE-AS4841. Substitute compatibility should be verified for your specific system.
What is the NSN for AN819-2D?
AN819-2D is cataloged in the U.S. Government catalog under NSN 4730-01-070-6528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN819-2D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.