PartsTable
Technical Data Sheet
Download PDF

AN748-48 — CLAMP,HOSE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

AN748-48: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, inside_diameter: 1.078 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, style_designator: BAND, fastening_device_type: THUMB HEAD SCREW. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-278-9212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN748-48
NSN: 4730-00-278-9212
NIINs: 002789212, 010721366
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
inside_diameter1.078 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
style_designatorBAND
fastening_device_typeTHUMB HEAD SCREW
NSN4730-00-278-9212
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: AN748-48 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: THUMB HEAD SCREW
•
STYLE DESIGNATOR: BAND
•
INSIDE DIAMETER: 1.078 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPETHUMB HEAD SCREW
STYLE DESIGNATORBAND
OVERALL WIDTH0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
INSIDE DIAMETER1.078 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
2821842Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN737TW48Reference document
Same NSN cross-reference
Reference document — Secondary reference
10108328Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN748-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN748-48?
AN748-48 is a CLAMP,HOSE.
What parts can replace AN748-48?
There are 3 known substitutes for AN748-48: 2821842, AN737TW48, 10108328. Substitute compatibility should be verified for your specific system.
What is the NSN for AN748-48?
AN748-48 is cataloged in the U.S. Government catalog under NSN 4730-00-278-9212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN748-48