PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN742TYPED11C
AN742TYPED11C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-726-9317, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN742TYPED11C
NSN: 5340-00-726-9317
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
cushioning_environmental_protectionWEATHER RESISTANT AND OZONE RESISTANT
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.970 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.752 INCHES NOMINAL IN
NSN5340-00-726-9317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN742TYPED11C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND A CLASS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.563 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.752 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
NONDEFINITIVE SPEC/STD DATA4 TYPE AND A CLASS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.752 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.970 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
SAE-AS21919Upgraded Successor
successor cross-reference
successor
AS21919WDG35Upgraded Successor
successor cross-reference
successor
5340PL0846491Upgraded Successor
successor cross-reference
successor
AS21919WDG9Upgraded Successor
successor cross-reference
successor
MILC8603TYPE4CLASSAUpgraded Successor
successor cross-reference
successor
AS21919WDG09Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN742TYPED11C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742TYPED11C?
AN742TYPED11C is a CLAMP,LOOP.
What parts can replace AN742TYPED11C?
There are 27 known substitutes for AN742TYPED11C: SAE-AS21919, AS21919WDG35, 5340PL0846491 and 24 more. Substitute compatibility should be verified for your specific system.
Is AN742TYPED11C still available?
AN742TYPED11C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN742TYPED11C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026