AN742F2 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AN742F2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 301 OR STEEL COMP 302 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-200-3046, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN742F2

NSN: 5340-00-200-3046
FSC: 5340 — Hardware, Commercial
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 301 OR STEEL COMP 302 BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.020 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
loop_inside_diameter	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
material_document_and_classification	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end	0.548 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.360 INCHES NOMINAL IN
NSN	5340-00-200-3046

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.548 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.020 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.548 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.360 INCHES NOMINAL IN
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 BAND

SUBSTITUTES & CROSS-REFERENCES 5

5340PL1866819Reference document

Same NSN cross-reference

Reference document — Informative reference only

AN742C2Reference document

Same NSN cross-reference

Reference document — Secondary reference

5340PL0845410Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS5587Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS5587C02Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy AN742F2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN742F2?

AN742F2 is a CLAMP,LOOP.

What parts can replace AN742F2?

There are 5 known substitutes for AN742F2: 5340PL1866819, AN742C2, 5340PL0845410 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AN742F2?

AN742F2 is cataloged in the U.S. Government catalog under NSN 5340-00-200-3046. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN742F2 — CLAMP,LOOP

Request a Quote — AN742F2