PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN742D24C
AN742D24C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.063 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-726-9322, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN742D24C
NSN: 5340-00-726-9322
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.063 INCHES NOMINAL IN
loop_inside_diameter1.375 INCHES NOMINAL IN
nondefinitive_spec/std_data4 TYPE AND A CLASS
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.405 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.187 INCHES NOMINAL IN
NSN5340-00-726-9322
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN742D24C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND A CLASS
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
LOOP INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA4 TYPE AND A CLASS
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER1.375 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALRUBBER CUSHION
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.405 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
5340PL0727323Upgraded Successor
successor cross-reference
successor
5340001863389Upgraded Successor
successor cross-reference
successor
AN742D50Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
C8603ANDTYPE1ANDCLASSAUpgraded Successor
successor cross-reference
successor
AN742D64Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN742D24C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742D24C?
AN742D24C is a CLAMP,LOOP.
What parts can replace AN742D24C?
There are 27 known substitutes for AN742D24C: 5340PL0727323, 5340001863389, AN742D50 and 24 more. Substitute compatibility should be verified for your specific system.
Is AN742D24C still available?
AN742D24C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN742D24C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026