PartsTable / COMPONENT / AN742D14
AN742D14
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.051 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3418, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN742D14
NSN: 5340-00-186-3418 FSC: 5340 CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material ALUMINUM ALLOY 2024 BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.051 INCHES NOMINAL IN loop_inside_diameter 0.875 INCHES NOMINAL IN material_document_and_classification QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND distance_from_loop_center_to_tongue_end 1.063 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.845 INCHES NOMINAL IN NSN 5340-00-186-3418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: AN742D14
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
• DISTANCE FROM LOOP CENTER TO TONGUE END: 1.063 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• MATERIAL: ALUMINUM ALLOY 2024 BAND
• MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND DISTANCE FROM LOOP CENTER TO TONGUE END 1.063 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP MATERIAL ALUMINUM ALLOY 2024 BAND MATERIAL THICKNESS 0.051 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 1.063 INCHES NOMINAL IN MATERIAL ALUMINUM ALLOY 2024 BAND MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND STYLE DESIGNATOR SINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
C056 Interchangeable interchangeable cross-reference
interchangeable
BR1615 Interchangeable interchangeable cross-reference
interchangeable
S4950 Interchangeable interchangeable cross-reference
interchangeable
6532NCM030809 Interchangeable interchangeable cross-reference
interchangeable
3642010595 Interchangeable interchangeable cross-reference
interchangeable
10595 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy AN742D14?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN742D14?
AN742D14 is a CLAMP,LOOP.
What parts can replace AN742D14?
There are 11 known substitutes for AN742D14: C056, BR1615, S4950 and 8 more. Substitute compatibility should be verified for your specific system.
Is AN742D14 still available?
AN742D14 is currently cancelled.
Request a Quote — AN742D14