The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, overall_width: 0.375 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_diameter: 0.031 INCHES NOMINAL IN, surface_treatment: ALUMINUM OVERALL, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-573-2248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN735DC14
NSN:5340-01-573-2248 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY OVERALL
overall_width
0.375 INCHES NOMINAL IN
special_features
CLAMP,LOOP TYPE BONDING;CLAMPS DELIVERED WITH ENDS OPEN A MINIMUM OF 3/4 OF INSIDE DIAMETER AND SHALL BE FLAT WITHIN 0.005 THRU THE CLAMP WIDTH
style_designator
CENTER MOUNT
material_diameter
0.031 INCHES NOMINAL IN
surface_treatment
ALUMINUM OVERALL
material_thickness
0.031 INCHES NOMINAL IN
loop_inside_diameter
0.875 INCHES NOMINAL IN
end_item_identification
AIRCRAFT APPLICATIONS; KC-46A TANKER A
material_document_and_classification
QQ-A-250/5 FED SPEC ALL MATERIAL RESPONSES OVERALL
distance_from_loop_center_to_tongue_end
0.825 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency
CLAMP,LOOP TYPE BONDING
NSN
5340-01-573-2248
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-H-6088 T42 CONDITION MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DIAMETER: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.825 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-H-6088 T42 CONDITION MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DIAMETER
0.031 INCHES NOMINAL IN
STYLE DESIGNATOR
CENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH
0.375 INCHES NOMINAL IN
MATERIAL THICKNESS
0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.825 INCHES NOMINAL IN
SPECIAL FEATURES
CLAMP,LOOP TYPE BONDING;CLAMPS DELIVERED WITH ENDS OPEN A MINIMUM OF 3/4 OF INSIDE DIAMETER AND SHALL BE FLAT WITHIN 0.005 THRU THE CLAMP WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735DC14?
AN735DC14 is a CLAMP,LOOP.
What parts can replace AN735DC14?
There is 1 known substitute for AN735DC14: SAE-AS7351. Substitute compatibility should be verified for your specific system.
What is the NSN for AN735DC14?
AN735DC14 is cataloged in the U.S. Government catalog under NSN 5340-01-573-2248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.