PartsTable
Technical Data Sheet
Download PDF

AN735D15 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN735D15: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-320-4580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN735D15
NSN: 5340-01-320-4580
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter0.938 INCHES NOMINAL IN
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.1255 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.750 INCHES NOMINAL IN
NSN5340-01-320-4580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN735D15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.1255 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.1255 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.750 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER0.938 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS7351Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN735D15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735D15?
AN735D15 is a CLAMP,LOOP.
What parts can replace AN735D15?
There is 1 known substitute for AN735D15: SAE-AS7351. Substitute compatibility should be verified for your specific system.
What is the NSN for AN735D15?
AN735D15 is cataloged in the U.S. Government catalog under NSN 5340-01-320-4580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN735D15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.