PartsTable
Technical Data Sheet
Download PDF

AN735-96 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN735-96: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, overall_width: 0.376 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 6.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-584-5412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN735-96
NSN: 5340-01-584-5412
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
overall_width0.376 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_diameter6.031 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter6.000 INCHES NOMINAL IN
end_item_identificationUH-X1
distance_from_loop_center_to_tongue_end3.485 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyINAVY-CLAMP LOOP
NSN5340-01-584-5412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN735-96 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DIAMETER: 6.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.485 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DIAMETER6.031 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.376 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END3.485 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYINAVY-CLAMP LOOP
END ITEM IDENTIFICATIONUH-X1
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS7351Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AN735-96?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN735-96?
AN735-96 is a CLAMP,LOOP.
What parts can replace AN735-96?
There is 1 known substitute for AN735-96: SAE-AS7351. Substitute compatibility should be verified for your specific system.
What is the NSN for AN735-96?
AN735-96 is cataloged in the U.S. Government catalog under NSN 5340-01-584-5412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN735-96