PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6264-8-34
AN6264-8-34 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-720-2050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6264-8-34
NSN: 4720-00-720-2050
FSC: 4720
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.406 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.766 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-720-2050
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AN6264-8-34 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
•
THREAD CLASS: 3B FIRST END
•
BURST TEST PRESSURE: 8000.0 POUNDS PER SQUARE INCH LBS
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END CONNECTION DESIGNSTRAIGHT FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
THREAD CLASS3B FIRST END
BURST TEST PRESSURE8000.0 POUNDS PER SQUARE INCH LBS
CONNECTION STYLESWIVEL NUT FLARE FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
OUTSIDE DIAMETER0.766 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MS28741-4-0062Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-8795Interchangeable
interchangeable cross-reference
interchangeable
MS28741-10-0700Interchangeable
interchangeable cross-reference
interchangeable
360-10D0720Interchangeable
interchangeable cross-reference
interchangeable
88019-224-1Interchangeable
interchangeable cross-reference
interchangeable
MS28741-4-0080Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6264-8-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6264-8-34?
AN6264-8-34 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AN6264-8-34?
There are 24 known substitutes for AN6264-8-34: MS28741-4-0062, MIL-H-8795, MS28741-10-0700 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6264-8-34?
AN6264-8-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-720-2050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6264-8-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026