PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6264-24-120
AN6264-24-120 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-684-3804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6264-24-120
NSN: 4720-00-684-3804
FSC: 4720
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter1.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-684-3804
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AN6264-24-120 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
THREAD QUANTITY PER INCH: 12 FIRST END
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
HYDROSTATIC TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: STRAIGHT FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
CROSS-SECTIONAL SHAPE STYLEROUND
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
THREAD QUANTITY PER INCH12 FIRST END
SEAT ANGLE37.0 DEGREES FIRST END
HYDROSTATIC TEST PRESSURE1000.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGNSTRAIGHT FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
OPERATING PRESSURE500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
7973943Interchangeable
interchangeable cross-reference
interchangeable
MILH8795AInterchangeable
interchangeable cross-reference
interchangeable
MS28741-8-0524Interchangeable
interchangeable cross-reference
interchangeable
390A32D0720Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-8795Interchangeable
interchangeable cross-reference
interchangeable
390AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6264-24-120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6264-24-120?
AN6264-24-120 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AN6264-24-120?
There are 22 known substitutes for AN6264-24-120: 7973943, MILH8795A, MS28741-8-0524 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6264-24-120?
AN6264-24-120 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-684-3804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6264-24-120

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026