PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6260-8-120
AN6260-8-120 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.406 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END, outside_diameter: 0.766 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-803-7667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6260-8-120
NSN: 4720-00-803-7667
FSC: 4720
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.406 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.766 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
inside_surface_conditionSMOOTH
NSN4720-00-803-7667
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AN6260-8-120 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
NOMINAL THREAD SIZE: 0.750 INCHES FIRST END IN
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: FUEL RESISTANT AND OIL RESISTANT
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
MEASURING METHOD AND LENGTH: 120.000 INCHES NOMINAL WORKING IN
TECHNICAL CHARACTERISTICS (FLIS)
END CONNECTION DESIGNSTRAIGHT FIRST END
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
OUTER COVERING ENVIRONMENTAL PROTECTIONFUEL RESISTANT AND OIL RESISTANT
SEAT ANGLE37.0 DEGREES FIRST END
INSIDE SURFACE CONDITIONSMOOTH
MEASURING METHOD AND LENGTH120.000 INCHES NOMINAL WORKING IN
SPECIFICATION/STANDARD DATA96906-MS28741-8-1200 GOVERNMENT STANDARD
OPERATING PRESSURE2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7973943Interchangeable
interchangeable cross-reference
interchangeable
MILH8795AInterchangeable
interchangeable cross-reference
interchangeable
MS28741-8-0524Interchangeable
interchangeable cross-reference
interchangeable
390A32D0720Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-8795Interchangeable
interchangeable cross-reference
interchangeable
390AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6260-8-120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6260-8-120?
AN6260-8-120 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AN6260-8-120?
There are 23 known substitutes for AN6260-8-120: 7973943, MILH8795A, MS28741-8-0524 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6260-8-120?
AN6260-8-120 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-803-7667. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6260-8-120

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026