PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6246-19
AN6246-19 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, peripheral_diameter: 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN, center_hole_diameter: 0.968 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, cross-sectional_height: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR, material_document_and_classification: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6749, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6246-19
NSN: 5330-00-171-6749
FSC: 5330
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialLEATHER OVERALL
peripheral_diameter1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
center_hole_diameter0.968 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
cross-sectional_height0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-171-6749
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6246-19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.240 INCHES MINIMUM AND 1.244 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CENTER HOLE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.240 INCHES MINIMUM AND 1.244 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE
END ITEM IDENTIFICATIONW/S: MAIN FEED PUMPS; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); AIRCRAFT, C-18A, EC-18B; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); SUPPORT EQUIPMENT, B-1 AIRCRAFT; GUN, 5-IN./54 CAL, MK-42 & 45; HELICOPTER, MH-53E; SSBN MK-118 FIRE CONTROL SYS; DEEP SUBMERGENC SYSTEMS PROGRAMS (DSSP) A
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CENTER HOLE DIAMETER1.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
JOINT TYPESCARF-BUTT RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
582813Interchangeable
interchangeable cross-reference
interchangeable
MILR5521Interchangeable
interchangeable cross-reference
interchangeable
AN6246PC23Interchangeable
interchangeable cross-reference
interchangeable
1283-218Interchangeable
interchangeable cross-reference
interchangeable
P793Interchangeable
interchangeable cross-reference
interchangeable
582838Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6246-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6246-19?
AN6246-19 is a RETAINER,PACKING.
What parts can replace AN6246-19?
There are 26 known substitutes for AN6246-19: 582813, MILR5521, AN6246PC23 and 23 more. Substitute compatibility should be verified for your specific system.
Is AN6246-19 still available?
AN6246-19 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6246-19

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026