PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6244PC18
AN6244PC18 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, outside_diameter: 4.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.754 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1341, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6244PC18
NSN: 5330-00-186-1341
FSC: 5330
CAGE: 81350 — JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialLEATHER OVERALL
outside_diameter4.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.754 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-186-1341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6244PC18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: LEATHER OVERALL
•
APERTURE DIAMETER: 3.754 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALLEATHER OVERALL
APERTURE DIAMETER3.754 INCHES NOMINAL IN
OUTSIDE DIAMETER4.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
582813Interchangeable
interchangeable cross-reference
interchangeable
MILR5521Interchangeable
interchangeable cross-reference
interchangeable
AN6246PC23Interchangeable
interchangeable cross-reference
interchangeable
1283-218Interchangeable
interchangeable cross-reference
interchangeable
P793Interchangeable
interchangeable cross-reference
interchangeable
582838Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6244PC18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6244PC18?
AN6244PC18 is a GASKET.
What parts can replace AN6244PC18?
There are 18 known substitutes for AN6244PC18: 582813, MILR5521, AN6246PC23 and 15 more. Substitute compatibility should be verified for your specific system.
Is AN6244PC18 still available?
AN6244PC18 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6244PC18

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026