PartsTable / O-RING / AN6230B26
AN6230B26
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 4.719 INCHES MINIMUM AND 4.749 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-197-9582, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN6230B26
NSN: 5331-00-197-9582 FSC: 5331 — O-RINGCAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR center_hole_diameter 4.719 INCHES MINIMUM AND 4.749 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-197-9582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: AN6230B26
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 4.719 INCHES MINIMUM AND 4.749 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 4.719 INCHES MINIMUM AND 4.749 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
7283 Interchangeable interchangeable cross-reference
interchangeable
653 Interchangeable interchangeable cross-reference
interchangeable
3247 Interchangeable interchangeable cross-reference
interchangeable
115265 Interchangeable interchangeable cross-reference
interchangeable
TM539 Interchangeable interchangeable cross-reference
interchangeable
U1206TS Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy AN6230B26?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6230B26?
AN6230B26 is a O-RING.
What parts can replace AN6230B26?
There are 33 known substitutes for AN6230B26: 7283, 653, 3247 and 30 more. Substitute compatibility should be verified for your specific system.
Is AN6230B26 still available?
AN6230B26 is currently cancelled.
Request a Quote — AN6230B26