PartsTable
Technical Data Sheet
PartsTable / O-RING / AN6230B23

AN6230B23 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 110.3 MILLIMETERS MINIMUM AND 111.1 MILLIMETERS MAXIMUM MM, cross-sectional_height: 3.429 MILLIMETERS MINIMUM AND 3.632 MILLIMETERS MAXIMUM MM. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-579-7921, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6230B23
NSN: 5331-00-579-7921
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER
center_hole_diameter110.3 MILLIMETERS MINIMUM AND 111.1 MILLIMETERS MAXIMUM MM
cross-sectional_height3.429 MILLIMETERS MINIMUM AND 3.632 MILLIMETERS MAXIMUM MM
NSN5331-00-579-7921
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6230B23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.637 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER4.637 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE160 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER4.344 INCHES MINIMUM AND 4.374 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
N304-7-23InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
68547InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
N0304 2-425InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
N0304 2-245InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2-245 N304-75InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AN6227-88InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6230B23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6230B23?
AN6230B23 is a O-RING.
What parts can replace AN6230B23?
There are 18 known substitutes for AN6230B23: N304-7-23, 68547, N0304 2-425 and 15 more. Substitute compatibility should be verified for your specific system.
Is AN6230B23 still available?
AN6230B23 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6230B23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026