PartsTable
Technical Data Sheet
Download PDF

AN6230-43 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN6230-43: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 8.012 INCHES NOMINAL IN, center_hole_diameter: 7.689 INCHES MINIMUM AND 7.779 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 3.530 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-291-1852, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6230-43
NSN: 5330-00-291-1852
NIINs: 002911852, 008321545, 010393075
FSC: 5330 — Packing and Gasket Materials
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter8.012 INCHES NOMINAL IN
center_hole_diameter7.689 INCHES MINIMUM AND 7.779 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height3.530 MILLIMETERS NOMINAL MM
NSN5330-00-291-1852
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6230-43 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 7.704 INCHES MINIMUM AND 7.764 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER7.704 INCHES MINIMUM AND 7.764 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
AN6230B43Reference document
Same NSN cross-reference
Reference document — Secondary reference
2409-965521ALTAPC3467Reference document
Same NSN cross-reference
Reference document — Secondary reference
005-0064-51Reference document
Same NSN cross-reference
Reference document — Secondary reference
317-6700-805896REVAPC55Reference document
Same NSN cross-reference
Reference document — Secondary reference
PR2002-1PC65Reference document
Same NSN cross-reference
Reference document — Secondary reference
PR2001-1PC65Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN6230-43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6230-43?
AN6230-43 is a PACKING,PREFORMED.
What parts can replace AN6230-43?
There are 9 known substitutes for AN6230-43: AN6230B43, 2409-965521ALTAPC3467, 005-0064-51 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6230-43?
AN6230-43 is cataloged in the U.S. Government catalog under NSN 5330-00-291-1852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6230-43