PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6230-36
AN6230-36 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 6.219 INCHES MINIMUM AND 6.305 INCHES MAXIMUM IN, center_hole_diameter: 5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-054-6894, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6230-36
NSN: 5330-00-054-6894
FSC: 5330
CAGE: 73277 — HOUGHTON INTERNATIONAL INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter6.219 INCHES MINIMUM AND 6.305 INCHES MAXIMUM IN
center_hole_diameter5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
NSN5330-00-054-6894
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6230-36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
2587507Interchangeable
interchangeable cross-reference
interchangeable
10203-1Interchangeable
interchangeable cross-reference
interchangeable
LH63BG2Interchangeable
interchangeable cross-reference
interchangeable
MILL3661Interchangeable
interchangeable cross-reference
interchangeable
ASC1463202Interchangeable
interchangeable cross-reference
interchangeable
2-258N674-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6230-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6230-36?
AN6230-36 is a O-RING.
What parts can replace AN6230-36?
There are 32 known substitutes for AN6230-36: 2587507, 10203-1, LH63BG2 and 29 more. Substitute compatibility should be verified for your specific system.
Is AN6230-36 still available?
AN6230-36 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6230-36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026