PartsTable
Technical Data Sheet
Download PDF

AN6229-12 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN6229-12: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES NOMINAL, material: ALUMINUM ALLOY OVERALL, surface_treatment: ANODIZE OVERALL, peripheral_diameter: 1.000 INCHES NOMINAL IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_height: 0.153 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-291-7311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6229-12
NSN: 5330-00-291-7311
FSC: 5330 — Packing and Gasket Materials
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
angle90.0 DEGREES NOMINAL
materialALUMINUM ALLOY OVERALL
surface_treatmentANODIZE OVERALL
peripheral_diameter1.000 INCHES NOMINAL IN
center_hole_diameter0.500 INCHES NOMINAL IN
cross-sectional_height0.153 INCHES NOMINAL IN
cross-sectional_shape_styleANGLE
NSN5330-00-291-7311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6229-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.153 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
ANGLE: 90.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.153 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
ANGLE90.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.000 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
CWSS122-8-016Reference document
Same NSN cross-reference
Reference document — Secondary reference
BPD83894Reference document
Same NSN cross-reference
Reference document — Secondary reference
83894Reference document
Same NSN cross-reference
Reference document — Secondary reference
AI2008-4A016Reference document
Same NSN cross-reference
Reference document — Secondary reference
A12008-4A016Reference document
Same NSN cross-reference
Reference document — Secondary reference
SS122-8-016Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN6229-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6229-12?
AN6229-12 is a RETAINER,PACKING.
What parts can replace AN6229-12?
There are 6 known substitutes for AN6229-12: CWSS122-8-016, BPD83894, 83894 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6229-12?
AN6229-12 is cataloged in the U.S. Government catalog under NSN 5330-00-291-7311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6229-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.