PartsTable
Technical Data Sheet
PartsTable / O-RING / AN6227PC65
AN6227PC65 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 6.775 INCHES NOMINAL IN, center_hole_diameter: 6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-196-5351, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6227PC65
NSN: 5331-00-196-5351
FSC: 5331 — O-RING
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter6.775 INCHES NOMINAL IN
center_hole_diameter6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-196-5351
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6227PC65 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER6.202 INCHES MINIMUM AND 6.248 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
R5111MNInterchangeable
interchangeable cross-reference
interchangeable
XR5111NInterchangeable
interchangeable cross-reference
interchangeable
MS25036-113Interchangeable
interchangeable cross-reference
interchangeable
182065Interchangeable
interchangeable cross-reference
interchangeable
182046Interchangeable
interchangeable cross-reference
interchangeable
21161-3869Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6227PC65?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6227PC65?
AN6227PC65 is a O-RING.
What parts can replace AN6227PC65?
There are 28 known substitutes for AN6227PC65: R5111MN, XR5111N, MS25036-113 and 25 more. Substitute compatibility should be verified for your specific system.
Is AN6227PC65 still available?
AN6227PC65 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6227PC65

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026