PartsTable
Technical Data Sheet

AN6227B/115 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN6227B/115: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, center_hole_diameter: 0.724 INCHES NOMINAL IN, cross-sectional_height: 0.103 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-124-0422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6227B/115
NSN: 5331-00-124-0422
FSC: 5331 — O-ring
CAGE: F0229 — LE JOINT FRANCAIS (FRA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
center_hole_diameter0.724 INCHES NOMINAL IN
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5331-00-124-0422
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6227B/115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.724 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.724 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
SUBSTITUTES & CROSS-REFERENCES 3
NAS1613Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
RAR5750Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
F7432 4201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy AN6227B/115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6227B/115?
AN6227B/115 is a O-RING.
What parts can replace AN6227B/115?
There are 3 known substitutes for AN6227B/115: NAS1613, RAR5750, F7432 4201. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6227B/115?
AN6227B/115 is cataloged in the U.S. Government catalog under NSN 5331-00-124-0422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6227B/115