PartsTable
Technical Data Sheet
PartsTable / O-RING / AN6227-20DIS0GRIN
AN6227-20DIS0GRIN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND PLASTIC, center_hole_diameter: 1.040 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-916-4655, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6227-20DIS0GRIN
NSN: 5331-00-916-4655
FSC: 5331 — O-RING
CAGE: 99565 — ADMIRAL VALVE LLC DBA CPV MANUFACTURING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND PLASTIC
center_hole_diameter1.040 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-916-4655
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6227-20DIS0GRIN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.040 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC AND PLASTIC
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.040 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC AND PLASTIC
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
56-112131Interchangeable
interchangeable cross-reference
interchangeable
24061Interchangeable
interchangeable cross-reference
interchangeable
CGS293U025V4CInterchangeable
interchangeable cross-reference
interchangeable
4061Interchangeable
interchangeable cross-reference
interchangeable
HPK1Interchangeable
interchangeable cross-reference
interchangeable
24061-09/00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6227-20DIS0GRIN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6227-20DIS0GRIN?
AN6227-20DIS0GRIN is a O-RING.
What parts can replace AN6227-20DIS0GRIN?
There are 9 known substitutes for AN6227-20DIS0GRIN: 56-112131, 24061, CGS293U025V4C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6227-20DIS0GRIN?
AN6227-20DIS0GRIN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-916-4655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6227-20DIS0GRIN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026