PartsTable
Technical Data Sheet
AN6227-13 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 0.880 INCHES NOMINAL IN, center_hole_diameter: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-297-6516, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6227-13
NSN: 5331-00-297-6516
FSC: 5331 — O-RING
CAGE: 06644 — CHICAGO GASKET CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter0.880 INCHES NOMINAL IN
center_hole_diameter0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-297-6516
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6227-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.097 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 0.646 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
MATERIAL: RUBBER SILICONE CLASS Q
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.097 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.646 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
484 696Interchangeable
interchangeable cross-reference
interchangeable
671-00115Interchangeable
interchangeable cross-reference
interchangeable
115-7117Interchangeable
interchangeable cross-reference
interchangeable
AN6227-B13Interchangeable
Same NIIN cross-reference
interchangeable
S8057A13Interchangeable
Same NIIN cross-reference
interchangeable
5331PL0576956Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6227-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6227-13?
AN6227-13 is a O-RING.
What parts can replace AN6227-13?
There are 9 known substitutes for AN6227-13: 484 696, 671-00115, 115-7117 and 6 more. Substitute compatibility should be verified for your specific system.
Is AN6227-13 still available?
AN6227-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6227-13