PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN565DC832H2
AN565DC832H2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEADLESS (SETSCREW), point_style: CUP, thread_class: 3A A, point_diameter: 0.076 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN, fastener_length: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-524-4879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN565DC832H2
NSN: 5305-01-524-4879
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEADLESS (SETSCREW)
point_styleCUP
thread_class3A A
point_diameter0.076 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
fastener_length0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
point_chamfer_angle113.0 DEGREES MINIMUM AND 123.0 DEGREES MAXIMUM
internal_drive_styleHEXAGON
end_item_identificationHELICOPTER, UH-60A/UH-60D A
nominal_thread_diameter0.164 INCHES IN
NSN5305-01-524-4879
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN565DC832H2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
•
HEAD STYLE: HEADLESS (SETSCREW)
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
POINT DIAMETER: 0.076 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONHELICOPTER, UH-60A/UH-60D A
THREAD CLASS3A A
HEAD STYLEHEADLESS (SETSCREW)
MATERIALSTEEL CORROSION RESISTING OVERALL
POINT DIAMETER0.076 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
PART NAME ASSIGNED BY CONTROLLING AGENCYSETSCREW
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
AN565A8H12Interchangeable
interchangeable cross-reference
interchangeable
NASM565Interchangeable
interchangeable cross-reference
interchangeable
FF-S-200Interchangeable
interchangeable cross-reference
interchangeable
AN565FC8H5Interchangeable
interchangeable cross-reference
interchangeable
AN565E820H16Interchangeable
interchangeable cross-reference
interchangeable
5305PL0144605Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN565DC832H2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN565DC832H2?
AN565DC832H2 is a SETSCREW.
What parts can replace AN565DC832H2?
There are 16 known substitutes for AN565DC832H2: AN565A8H12, NASM565, FF-S-200 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN565DC832H2?
AN565DC832H2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-524-4879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN565DC832H2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026