PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN535-00-3
AN535-00-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,DRIVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: ROUND, head_height: 0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, pilot_length: 0.047 INCHES NOMINAL IN, head_diameter: 0.090 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN, pilot_diameter: 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-175-3224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN535-00-3
NSN: 5305-00-175-3224
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
head_height0.026 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
pilot_length0.047 INCHES NOMINAL IN
head_diameter0.090 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
pilot_diameter0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
fastener_length0.188 INCHES NOMINAL IN
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
nonmachine_thread_styleDRIVE SCREW (TYPE U)
nonmachine_nominal_thread_diameter0.073 INCHES IN
NSN5305-00-175-3224
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN535-00-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5305PL1370788Interchangeable
interchangeable cross-reference
interchangeable
SP910Interchangeable
interchangeable cross-reference
interchangeable
190258Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN535-00-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN535-00-3?
AN535-00-3 is a SCREW,DRIVE.
What parts can replace AN535-00-3?
There are 3 known substitutes for AN535-00-3: 5305PL1370788, SP910, 190258. Substitute compatibility should be verified for your specific system.
What is the NSN for AN535-00-3?
AN535-00-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-175-3224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN535-00-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026