PartsTable
Technical Data Sheet
Download PDF

AN515C8-28 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AN515C8-28: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.120 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN, thread_length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-054-6677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515C8-28
NSN: 5305-00-054-6677
NIINs: 000546677, 007214556
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_styleROUND
head_height0.120 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
thread_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
fastener_length1.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-00-054-6677
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515C8-28 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 9
112-0782-052Reference document
Same NSN cross-reference
Reference document — Secondary reference
2001634Reference document
Same NSN cross-reference
Reference document — Secondary reference
965399-620Reference document
Same NSN cross-reference
Reference document — Secondary reference
WC1052-052Reference document
Same NSN cross-reference
Reference document — Secondary reference
PH399-0832-28CBReference document
Same NSN cross-reference
Reference document — Secondary reference
MS35216-49Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN515C8-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515C8-28?
AN515C8-28 is a SCREW,MACHINE.
What parts can replace AN515C8-28?
There are 9 known substitutes for AN515C8-28: 112-0782-052, 2001634, 965399-620 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515C8-28?
AN515C8-28 is cataloged in the U.S. Government catalog under NSN 5305-00-054-6677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515C8-28

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.