PartsTable
Technical Data Sheet
Download PDF

AN515C-10-20 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AN515C-10-20: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN, screw_material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740, fastener_length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-050-9234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515C-10-20
NSN: 5305-00-050-9234
NIINs: 000509234, 005053147
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN
screw_materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-00-050-9234
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515C-10-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: ZINC NICKEL AND PASSIVATE
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE-AMS2700 ASSN STD SINGLE TREATMENT RESPONSE
•
THREAD LENGTH: 1.167 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTZINC NICKEL AND PASSIVATE
FASTENER LENGTH1.250 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAE-AMS2700 ASSN STD SINGLE TREATMENT RESPONSE
THREAD LENGTH1.167 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SUBSTITUTES & CROSS-REFERENCES 6
GA3135-068Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A119041Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35216-60Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35233-68Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS51957-68Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5305PL0994788Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN515C-10-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515C-10-20?
AN515C-10-20 is a SCREW,MACHINE.
What parts can replace AN515C-10-20?
There are 6 known substitutes for AN515C-10-20: GA3135-068, A119041, MS35216-60 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515C-10-20?
AN515C-10-20 is cataloged in the U.S. Government catalog under NSN 5305-00-050-9234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515C-10-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.