PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515B5R6
AN515B5R6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.095 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.217 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN, thread_length: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515B5R6
NSN: 5305-00-151-0765
FSC: 5305
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
SPECIFICATIONS
head_styleROUND
head_height0.095 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.217 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN
thread_length0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.125 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
NSN5305-00-151-0765
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515B5R6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: ROUND
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.095 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.125 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 40
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEROUND
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
THREAD LENGTH0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
HEAD HEIGHT0.095 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.125 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW MATERIALCOPPER ALLOY
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FFS92ANDTYPE3STYLE1CInterchangeable
interchangeable cross-reference
interchangeable
AN515-8R12Interchangeable
interchangeable cross-reference
interchangeable
808P107CInterchangeable
interchangeable cross-reference
interchangeable
784-8-20Interchangeable
interchangeable cross-reference
interchangeable
AN515-8R20Interchangeable
interchangeable cross-reference
interchangeable
1177-8-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515B5R6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515B5R6?
AN515B5R6 is a SCREW,MACHINE.
What parts can replace AN515B5R6?
There are 18 known substitutes for AN515B5R6: FFS92ANDTYPE3STYLE1C, AN515-8R12, 808P107C and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515B5R6?
AN515B5R6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515B5R6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026