PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515B4-5
AN515B4-5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515B4-5
NSN: 5305-00-151-0034
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
NSN5305-00-151-0034
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515B4-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL: COPPER ALLOY
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.086 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
THREAD CLASS2A A
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SCREW MATERIALCOPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.086 INCHES MAXIMUM IN
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
11208Interchangeable
interchangeable cross-reference
interchangeable
30193Interchangeable
interchangeable cross-reference
interchangeable
A19-8Interchangeable
interchangeable cross-reference
interchangeable
STM14Interchangeable
interchangeable cross-reference
interchangeable
900AS/L-7/16Interchangeable
interchangeable cross-reference
interchangeable
STP 4714LTGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515B4-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515B4-5?
AN515B4-5 is a SCREW,MACHINE.
What parts can replace AN515B4-5?
There are 22 known substitutes for AN515B4-5: 11208, 30193, A19-8 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515B4-5?
AN515B4-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515B4-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026