PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-6R64
AN515-6R64 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.103 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 3.891 INCHES MINIMUM IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-836-9006, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-6R64
NSN: 5305-00-836-9006
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleROUND
head_height0.103 INCHES NOMINAL IN
thread_class2A A
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length3.891 INCHES MINIMUM IN
screw_materialSTEEL COMP 1010
fastener_length3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-836-9006
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-6R64 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
•
HEAD HEIGHT: 0.103 INCHES NOMINAL IN
•
HEAD STYLE: ROUND
•
SCREW SURFACE TREATMENT: OXIDE
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
THREAD LENGTH: 3.891 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
HEAD HEIGHT0.103 INCHES NOMINAL IN
HEAD STYLEROUND
SCREW SURFACE TREATMENTOXIDE
THREAD DIRECTIONRIGHT-HAND
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD LENGTH3.891 INCHES MINIMUM IN
THREAD QUANTITY PER INCH32
NOMINAL THREAD DIAMETER0.138 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
65061Interchangeable
interchangeable cross-reference
interchangeable
5061Interchangeable
interchangeable cross-reference
interchangeable
SPEC 7246-2Interchangeable
interchangeable cross-reference
interchangeable
10-249Interchangeable
interchangeable cross-reference
interchangeable
47563Interchangeable
interchangeable cross-reference
interchangeable
2058104Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-6R64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-6R64?
AN515-6R64 is a SCREW,MACHINE.
What parts can replace AN515-6R64?
There are 20 known substitutes for AN515-6R64: 65061, 5061, SPEC 7246-2 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-6R64?
AN515-6R64 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-836-9006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-6R64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026